Wednesday, July 23, 2025

Project Review: Mortal Engines Main Title treatment concepts May 2017

 
 
Mortal Engines 3D Main Title Key Art- My third conceptual design pass at the Main Title with a deconstructed modern facade over and older substrate material.


 
Mortal Engines 3D Main Title Key Art- A screen grab in a simple clay shader to showcase the surfaces without textures.


 Mortal Engines 3D Main Title Key Art- Another screen grab in a simple clay shader to showcase the surfaces with displacement. Up close you can see that the edges are rough, but for deadline and cost we went this direction until it was picked, which did not happen.


Mortal Engines 3D Main Title Key Art-  A textured screen grab shows the internal details on the "Dot" in the engine icon in the middle of the "O" in Mortal with the Aqua glass material showing thru to the inner workings.


 
Mortal Engines 3D Main Title Key Art- this screen grab in 3DS max shows materials as well as the pixelated displacement map used to push the geometry in and out.


 
Mortal Engines 3D Main Title Key Art- This design was the most simple of them all, with some cracks in the design and was a bit brighter as well.


Mortal Engines 3D Main Title Key Art- A Z-Depth is always supplied so Art Directors can adjust the image based on distance, Smart 3D


 
Mortal Engines 3D Main Title Key Art-A screen grab in a simple clay shader to showcase the surfaces without textures.
 

 
Mortal Engines 3D Main Title Key Art-an angled view screen grab in a simple clay shader to showcase the build.


Mortal Engines 3D Main Title Key Art- This Title treatment was in the middle of the top two designs, with a bit more distressing as well as a second inner surface poking through the top one.


Mortal Engines 3D Main Title Key Art- Screen grab in a simple clay shader to showcase the surfaces without textures

 
 
 
Mortal Engines 3D Main Title Key Art- A screen grab in a simple clay shader showing the dual surface model inside the typeface.
 


Project Review
Main Title Treatment Concepts
May 2017
 

Client: Universal Pictures via BOND
Creative Direction: 
Patrick Dillon. 
Project Date:  May 2017.


     Today I can post the work I did for Patrick at the BOND Agency for Universal Pictures post apocalyptic film Mortal Engines released in theaters in 2018. 

     I was excited about building a Title for the film due to the nature of the story with repurposed architectural elements that were weathered and built over other parts with layers and aging.

       I did three concepts with the third and favorite one up at the top of this post, with it getting progressively simpler in each design. Each has a distinct aqua glow around the dot in the center of the letter "O" in Mortal as an engine icon with light and power illumination the title.
 
     This post include some Behind the Art  with some review on the textures I built, and the use of a displacement map that I created for the custom designed plates over a substrate material indicative to the production design use of architecture in the moving city's in the film build up of old world architecture with modern Sci Fi parts built over the top.

      With displacement it is quicker than building it out in geometry, but it has limitations due to the density of the mesh to get a smooth displacement. In the close ups you can see that I had to use a lower resolution at this the Comping stage. If finished I was going to rebuild all of it without displacement and use quad subdivision building. I was actually hoping to go to the next level with this.

     I have an inner and outer object on two of the designs so as it displaces the underlying substrate material pops thru as a 2 layer design.
 
     For a different client I was able to build out all the layers as geometry and I hope in the future to post that. That model was for a film opening concept fly through so displacement was not going to work, and it was ll hand built, but they had a bigger budget and time frame so we could achieve that.
 
     I am still doing freelance now as I hunt for a full-time place to work at, so if you need a bid for a 3D Illustration or 3D Logo, or a 3D Model feel free to contact me for a quote. I am open to Hourly gig's, Work Retainers, Part-time, and Full Time opportunities [ Open to relocation ] would be best.

I have worked remote since 2009, so I am ready to help you.

                                 Cheers, THOM

Monday, July 14, 2025

Project Review: Aquaman Key Art Concepts and Finish April-July 2018

 

Aquaman 3D Key Art- My first concept design using the green and orange color palette. This one has the ribbed Icon with glass letters and an orange brushed metal DC badge. This was my favorite.

 

Aquaman 3D Key Art- a Screen Grab showing the lighting set up. To get exact highlight placements it is really quick to put individual lights for the letters, as well as a global light set up as I have the Cebas Final Render rectangular lights for long light box like highlights above and below.

 Aquaman 3D Key Art- a Screen Grab in Clay shader showing surface from the camera. This is the subdivided mesh with 4 iterations so a very mesh dense object to get the ribbing smooth.

 

 Aquaman 3D Key Art- a Screen Grab in Clay shader showing surface on the Poly Base Mesh with no Sub-D added.

 

 Aquaman 3D Key Art- a Screen Grab in Clay shader 3/4 front low angle, here you can see the displacement needed the 4 levels to get them smooth enough for render-time.

 

 Aquaman 3D Key Art- a Screen Grab in Clay shader from behind shows the Icon is 2 sided since it was glass and needed better internal refraction's with more geometry.

 

 Aquaman 3D Key Art- a second render with the type kerned in closer using all the same settings as above, with the highlight lights moved in to each letter.

 

 Aquaman 3D Key Art- a Screen Grab with viewport materials and no edged faces. this lets me see the smoothing on the Icon to see if I needed more geometry before rendering, which was long.

 

 Aquaman 3D Key Art- a Screen Grab in Clay shader showing surface for this tighter design.

 

 Aquaman 3D Key Art- a Screen Grab with map and materials called out.
 
 

 Aquaman 3D Key Art- This brighter version is what they picked and I made the finish on the logo used.
 
 
 
 Aquaman 3D Key Art- a Screen Grab in Clay shader showing the surface and lighting I used to get the even highlights from the top.
 
 
 
 Aquaman 3D Key Art- a Screen Grab in Clay shader showing the big reflection sphere I used here to match the MGFX treatment.
 
 
 
Aquaman 3D Key Art- a Screen Grab in Clay shader showing a large off camera light box I used for reflections into the glass Icon. Letters were metal so this was to get more contrast in the icon as in a lighter space it needed that differentiation.
 
 
 
 Aquaman 3D Key Art- some early glass concepts for the icon. At this stage I was still on black with the dark feel of other DC films.
 
 
 
 Aquaman 3D Key Art- I loved this one very subtle highlights with higher contrast. I built this scene for Superman Returns years earlier in 2006 so I had the glass dialed in already.
 
 
 
Aquaman 3D Key Art- This became the finished material just did a night to day swap on the environment.


Project Review
Aquaman Key Art
Concepts and Finish April-July 2018
 

Client: Warner Bros. Discovery, Inc + DC Comics via BOND
Creative Direction: 
Patrick Dillon. 
Project Date:  April- June 2018.


     Today I can post the work I did for Patrick at BOND for DC's Aquaman. I love superhero films, and I have had the pleasure to work on many of them over my career. 

     Aquaman was introduced into the DC film universe with a cameo in Batman vs Superman Dawn of Justice back in 2016, so I was looking forward to working on Key Art Titles for the film in 2018. The character dates back to 1941 right before we officially entered WWII and appeared in the 50's and 60's, so he has been around a while. I am Gen-X so I grew up with both the comics, and the Saturday morning Cartoons. I remember the distinctive orange and green, being complimentary colors looking nice in his suit so you will see my paying respect to this color combo with my earlier concepts I have.
 
   I also posted Behind the Art images with some wire frames and Clay shader screen grabs showing the concept and final finish build out. I also show the displacement map I created for the custom designed ribbed texture in the glass Icon I developed in the early stages that was not picked for the final. It the film the gateway entrance uses this shape as well as the tips of the trident.
 
    I built out the Icon first, then the type was laid out for me by designers and Art Directors at L&R, and delivered in both a compact format and spread out and kerned very wide, which is what they ended up with. The 3D models I build all can be reused and rendered out at many different angles, finishes, and using displacement the geometry was built to be quads so I could add a real 3D texture to the work, or keep it smooth as glass.
 
    The first postings above are of the Key Art concepts, and this is where I had some creative room to build out what I saw as a nice dark and moody render of the logo on black. I was playing off of Jack Snyder's influence in this iteration of the DC universe in both Batman and Superman films, as both had a much darker look than where this film moved to. For this project, glass was an integral part of the designs in both versions. It played off water as a transparent texture.

     I did go to a bright look that is much whiter and smooth for the final that was picked. I did get the finish on the Key Art, and they used my 3D Logos and Icon for both the first and second films, along with all 3rd party marketing as well as at the films premiere with a 9000 pixel icon render that was almost 17 feet tall on Hollywood boulevard at the Chinese Theater.

     A cool side note is they reused the Logo and Icon for the sequel too. Often like in the X-Men films, each film gets a new Icon and title look as I did work on a number of them myself.
 
     I am back full time doing freelance as I hunt for a full-time place to work at, so if you need a bid for a 3D Illustration or 3D Logo, or a 3D Model feel free to contact me for a quote. I am open to Hourly gig's, Work Retainers, Part-time, and Full Time opportunities [ Open to relocation ] would be best. I have worked remote since 2009, so I am ready to help you.

                                 Cheers, THOM

Monday, July 7, 2025

Project Review: Toy Story 4 3D Logo Neon Illustrations for Key Art 2018


3D Neon Toy Story 4 Key Art Title Concept Designs. This first image was so close to being the final pick. A straight on shot with the aged and rusty finishes. This is still my desktop on my workstation. I loved this project for PIXAR!



3D Neon Toy Story 4- Key Art Title in a clean finish similar to the other films.
 
 

3D Neon Toy Story 4- Ambient/ Dirt Render to accentuate the intersections in the geometry as well as add in ambient pass lighting to get better realism.


3D Neon Toy Story 4- Key Z-Depth Pass for distance based edits in post for the Art Directors at the Leroy and Rose agency.


3D Neon Toy Story 4- A subdivided Clay Screen grab from the Camera View showing the mesh levels used in the build.


3D Neon Toy Story 4  Base mesh Low Poly Screen Grab in Clay material showing just the forms.


3D Neon Toy Story 4  A Screen grab with Materials to show inside the 3D Neon Tubes as well as the the clips and rivets in my build.


3D Neon Toy Story 4  Key Art Title Concept Design View #2 a Low Angle with a bit of fish-eye on the lens. This is the cleaner of the two finishes.

 

3D Neon Toy Story 4  Key Art Title Concept Design in the rusted and weathered look.

 

3D Neon Toy Story 4  The Ambient Render pass. This angles shows the deformations on the rough wall back plate better at an angle.



3D Neon Toy Story 4  The Z-Depth mask Render Pass here falls off for more distance based edits after the image is delivered.
 

3D Neon Toy Story 4  Screen Grab showing the side of the build. If you look closely there is a neon tube behind the sign tin backing to give a back glow on the wall.


 
3D Neon Toy Story 4  Super close up Screen Grab in Clay material shows that little toggle switch I built.


 
3D Neon Toy Story 4 Super close up Screen Grab in Clay material shows the tube clip details. 

 

 
3D Neon Toy Story 4 a high angle view in the Clay materials. This view shows the hangers on top.


 
3D Neon Toy Story in Clay material finish showcasing surface only in a low angle up view on the sign.


Project Review
for Key Art 2018
 

Client:  PIXAR/ Walt Disney Feature Animation via Leroy and Rose
Creative Direction:  Melchior Lamy 
Project Date:  February to June 2018.


     I can now post work that I did for Melchior at Leroy & Rose for PIXAR's Toy Story 4 from back in 2018. This design went all the way to the 11th hour and was close to finishing, but they went more simple in the end.

     As a 3D Artist, doing anything for PIXAR is an honor as they were trailblazers in the field of 3D Animation which helped mainstream the technology to where it is at today as now it's considered common place.
 
     I also posted Behind the Art images with some wire frames and Clay shader screen grabs showing way I build out 3D Neon. I have always loved neon signs, from the light they give off, the flickers, and the buzz they emanate. Being a Classic Car nut, these signs are found all over Vintage Car shops so it is a natural fit for me a gear head. Also, I am a fabricator and builder, and love the craft behind real the ones.

    I found over a few years of building out neon a few simple things I do. I create both the exterior glass tube, that's two sided with a 3DSmax Shell modifier added to the spline to give it a glass thickness. I also build out a second internal object spline that that represents the gas inside the tube that glows, and this is where I put the self illumination glow on so it refracts a bit through the tube glass. I also add color to the glass itself to simulate color bleed so red glass with red glow etc. I love the little clips that hold the tubes as well.

    For this 4th installment of Toy Story I was directed to go with neon for the main 3D Logo, as a good portion of the film takes place in a county fair environment as well as inside a antique store. I did both a clean versions of the sign, as well as aged and rusted version. So, my baseline was a delivery of 2 views in 2 finishes. 
 
    I did work on Key Art 3D Titles for Toy Story 4 for a few other vendors as well after this, but this version was a wall mounted hanging sign design with a lot more vintage bits added in. The toggle switch was placed on the bottom extrusion of tin sign. That 3D Model I built, and sell at TurboSquids Stock 3D model site here. I also built out the wall hangers on the back and the vintage square nails with cross hatched tips. A few wires completed the look and an aged wall was built as a 3D Displacement with modeled out surface cracks and irregularities.
 
    Again, just this one 3D model can be reused and rendered out at many different angles.The first comp is where the time is mostly billed at, yet once made, the re-shoots are so much quicker when the model is already ready to go, so it really deserves a few shots at least.
 
     I am back full time doing freelance as I hunt for a full-time place to work at, so if you need a bid for a 3D Illustration or 3D Logo, or a 3D Model feel free to contact me for a quote. I am open to Hourly gig's, Work Retainers, Part-time, and Full Time opportunities [ Open to relocation ] would be best. I have worked remote since 2009, so I am ready to help you.

                                 Cheers, THOM